For directory-integrated, primary zones, secondary servers can be used and are supported but not required for this purpose. For example, two DNS servers running on Active Directory Domain Controllers (DCs) can be redundant primary servers for a zone (Active Directory Integrated Zones). Domain Controllers running the DNS service hosting Active Directory Integrated zones can provide the same benefits as adding a secondary server while also providing additional benefits such as increased security and reliability. Secondary servers can also be used to offload DNS query traffic in areas of the network where a zone is heavily queried. In addition, if a primary server is unavailable, a secondary server can provide the same name resolution service for the hosted zone(s) while the primary server is available. If you add a secondary server, one design option is to locate the server as close as possible to clients that have a high demand for hostname resolution. Also, you may consider placing secondary servers on remote subnets that are connected using slower or unreliable WAN links. This design provides a local DNS server so that clients are not required to cross the WAN link for name resolution. In addition, a WAN link failure would not impact host name resolution in this scenario. Because the primary server always maintains the master copy of the zone, a secondary server relies on DNS zone transfer processes to obtain updated zone information. The secondary DNS server stores its copy of the zone as a READ-ONLY copy. If you do deploy secondary servers across the WAN, you should consider the traffic associated with zone transfers in your bandwidth requirements.

Add a Scecondary Zone via the Wizard

To add a secondary server to a zone using the Windows interface:

Add A Secondary Zone via Command Line

To add a secondary server to a zone using the command line. At a command prompt, type the following command, and then press ENTER: Here is an example…

ServerName

Specifies the hostname of the DNS server. You can also type the Internet Protocol (IP) address of the DNS server. To specify the local computer, you can also type a period (.).

ZoneName

Specifies the fully qualified domain name (FQDN) of the secondary zone that you are adding. The zone name must be the same as the name of the primary zone from which the secondary zone is created.

MasterIPaddress

Specifies one or more IP addresses for the secondary zone master servers, from which it copies zone data.

FileName

Specifies the name of the file to use for creating the secondary zone.

Allow Zone Transfers

Note: On the DNS server hosting the primary zone, you must configure the zone to Allow Zone Transfers, otherwise, the secondary server will not be able to load the zone.

How to Add a Secondary DNS Server - 61